Sungrow IDC180E A0CH0038 DC Charging Station

(180 kW, 2 × 5 m CCS charging cables, 380 A, RFID/Plug & Charge (PnC) authentication, Eichrecht-compliant metering, LAN/Wi-Fi/SIM connectivity, OCPP 1.6/Modbus TCP)

Hinta pyynnöstä (projektikohtainen hinnoittelu)
Technical Information
  • 3-year manufacturer's warranty
  • Charging power of up to 180 kW
  • 2 CCS connectors with 5 m charging cables
  • Integrated metering compliant with German Eichrecht requirements for accurate kWh-based billing
  • Data transmission via LAN, Wi-Fi or mobile network (SIM card is usually provided by your backend operator)
  • Communicates via OCPP 1.6 and is compatible with various backend systems
  • High-quality aluminium construction
  • Optional payment terminal available for credit card payments
● Räätälöity ratkaisu? Ota rohkeasti yhteyttä meihin.
Beschreibung des Bildes
Beschreibung des Bildes

Often bought with

Ei tuotteita löytynyt

Sungrow IDC120E and IDC180E: 120 kW and 180 kW DC Fast Chargers With Isolated Air Cooling

The Sungrow IDC120E (A0CH0034) and IDC180E (A0CH0038) bring 120 kW and 180 kW of DC fast charging to commercial sites. Each station has two CCS2 outlets, so one vehicle can take the full output or two vehicles can share it: 2 × 60 kW on the IDC120E and 2 × 90 kW on the IDC180E. Efficiency reaches up to 96.5 %, and standby consumption stays at or below 48 W, so little energy is lost as heat or while the station waits.

The key to the low maintenance is Sungrow’s isolated air cooling. The power modules are kept apart from the cooling airflow, so dust stays away from the electronics and no dust filter mat has to be replaced. Sungrow designs and builds the modules itself and distributes the cooling so that the temperature difference between them stays within 2 °C. This even load supports a long service life. Request a quote for the IDC120E or IDC180E for your site.

Image
Image

Sungrow IDC DC Charging Stations for Hotels, Retail and Logistics: Easy to Use and Ready for Solar and Storage

Sungrow IDC stations are made for sites where many different drivers arrive, such as hotels, supermarkets, retail parks, company car parks, logistics yards and public charging points. Drivers follow each session on a 10-inch colour touch screen and can unlock charging in several ways. A mechanical arm supports the heavy charging cable so it stays off the ground, and the design allows barrier-free access. Even at full output, typical noise stays at or below 65 dB(A) at 1 m.

Sungrow supplies PV inverters, energy storage and EV chargers under one brand, and the IDC stations are prepared for combination with solar and storage. Operators can plan generation, storage and charging with a single partner and a shared technology base, which keeps planning and service in one place. The standard warranty is three years. Request a quote to find out whether the 120 kW or the 180 kW station fits your site.

FAQ to Sungrow DC Charging Station

Which should I choose, the Sungrow IDC120E A0CH0034 or the IDC180E A0CH0038?

Both belong to the same Sungrow IDC platform. The IDC120E delivers up to 120 kW, or 2 × 60 kW, with 250 A per outlet. The IDC180E delivers up to 180 kW, or 2 × 90 kW, with 380 A per outlet, and the higher current helps vehicles with lower battery voltages reach high power. Choose the IDC120E for moderate traffic and longer parking times, and the IDC180E for busy sites where vehicles must be turned around quickly.

Which electric vehicles can charge at these stations?

Any vehicle with a CCS2 inlet. The 200–1,000 V DC output range covers 400 V and 800 V platforms, and communication follows DIN SPEC 70121 and ISO 15118. Each vehicle charges at the power it accepts, up to the limit of the station.

How can I bill customers, and which access and payment options are available?

The platform supports CE, MID and PTB energy meters, and these article numbers are offered with Eichrecht-compliant metering for kWh-accurate billing. Access is controlled via RFID, and Plug & Charge is available. A card payment terminal is an optional feature at Sungrow. For publicly accessible charge points of 50 kW and above, AFIR requires card payment, so ask us which configuration fits your site.

How are the stations managed and updated?

Both are managed through Sungrow’s iEnergyCharge platform, which provides monitoring and over-the-air firmware updates. They communicate with your backend via OCPP 1.6J, and Sungrow has announced OCPP 2.0.1.

May you also like

Ei tuotteita löytynyt